VERSION 1
DE
(a) Draufsicht auf das Array hexagonaler Kavitäten, die im Silizium eine regelmäßige Bienenwabenstruktur (Honeycomb-Struktur) ausbilden. Die dunklen Flächen entsprechen den geätzten Kavitäten, die hellen Linienzüge dem verbliebenen Silizium-Stegnetzwerk zwischen den Zellen. 
(b) Übersichtsaufnahme der hexagonalen Kavität im Querschnitt (Cross Section); das dunkelgraue Gebiet entspricht dem stehengebliebenen Silizium, der helle Bereich der geätzten Kavität („Etched Cavity").
(c) Querschnitt nach der SiO₂-Abscheidung; die hellgraue Schicht im Kontrast zum dunkelgrauen Si-Substrat ist das abgeschiedene SiO₂ auf Seitenwand und Kavitätsboden.

EN
(a) Top view of the array of hexagonal cavities forming a regular honeycomb structure in the silicon. The dark areas correspond to the etched cavities, while the bright lines represent the remaining silicon rib network between the cells. 
(b) Overview image of the hexagonal cavity in cross section; the dark grey region corresponds to the remaining silicon, the bright region to the etched cavity. 
(c) Cross section after SiO₂ deposition; the light grey layer, in contrast to the dark grey Si substrate, is the deposited SiO₂ on the sidewall and cavity bottom.

VERSION 2

DE
(a) Übersichtsaufnahme der hexagonalen Kavität im Querschnitt (Cross Section); das dunkelgraue Gebiet entspricht dem stehengebliebenen Silizium, der helle Bereich der geätzten Kavität („Etched Cavity"). 
(b) Detailaufnahme der Seitenwand bei starker Vergrößerung; die periodischen Auswölbungen („Scallops") des Bosch-Prozesses sind deutlich erkennbar und dienen zur Bewertung der Seitenwandrauigkeit. 
(c) Querschnitt nach der SiO₂-Abscheidung; die hellgraue Schicht im Kontrast zum dunkelgrauen Si-Substrat ist das abgeschiedene SiO₂ auf Seitenwand und Kavitätsboden.

EN
(a) Overview image of the hexagonal cavity in cross section; the dark grey region corresponds to the remaining silicon, the bright region to the etched cavity ("Etched Cavity"). 
(b) High-magnification detail of the sidewall; the periodic undulations ("scallops") resulting from the Bosch process are clearly visible and are used to evaluate the sidewall roughness. 
(c) Cross section after SiO₂ deposition; the light grey layer, in contrast to the dark grey Si substrate, is the deposited SiO₂ on the sidewall and cavity bottom.
